China 220V, 60Hz Gas Powered Air Compressor for Ice Cream

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Click Here

Product Description

                      220v,60hz gas powered air compressor for ice cream

I. Introduction:
 
Main features of oil-lubricated screw air compressor:

1.Imported top-grade air end, as the third generation product of state-of -the-art brand in the world, with asymmetrical 5:6 tooth rotors, is provided with outstanding performance and high efficiency far beyond other similar-type brands.
2. Full-intellectual control system and LCD screen, with self-diagnosis and protection devices; remote control and multi-host interlock control, realizing unattended and high -tech operation.
3.Y series three-phase asynchronous motor special for compressor, imported CZPT bearing, F-level insulation, IP54, especially suitable for long-term use, safe and reliable.
4. Imported oil filter, oil-air separation filter cartridge to ensure oil content10000hours.
5. Air volume auto-intelligent control, auto shutdown after long idle run to ensure over 25% of energy saving.
6. Valve oil-free system design, achieving a safer and more reliable operation of the whole machine; main machine adopts 1 imported special compressor oil, reducing the leakage inside and outside of the compressor, improving efficiency of main machine and prolonging the service life.
7. High efficiency, quiet, low vibration, installation without foundation required, convenient for customer maintenance, confirming to ISO9001 standard and CE.

II. Technical specification
 

EX series technical parameters:                                        
Model EX7.5A EX11A EX15A EX18.5A EX22A EX30A EX37A/W EX45A/W EX55A/W EX75A/W EX90A/W EX110A/W EX132A/W EX160A/W EX185A/W EX200A/W EX220A/W EX250A/W EX280W EX315W EX355W
Free air delivery/Discharge air pressure  (M3/min/ Mpa) 1.2/0.7 1.7/0.7 2.4/0.7 3.1/0.7 3.7/0.7 5.2/0.7 6.5/0.7 7.5/0.7 10.5/0.7 13.5/0.7 16.5/0.7 20.5/0.7 25.8/0.7 28.8/0.7 32/0.7 40/0.7 40/0.7 45/0.7 51.3/0.7 55/0.7 64/0.7
1.1/0.8 1.6/0.8 2.3/0.8 3/0.8 3.5/0.8 5/0.8 6.3/0.8 7.2/0.8 9.5/0.8 13/0.8 16/0.8 19/0.8 23/0.8 27/0.8 30/0.8 37/0.8 37/0.85 42/0.8 50.2/0.8 50.3/0.8 58/0.8
1/1.0 1.4/1.0 2.2/1.0 2.8/1.0 3.0/1.0 4.1/1.0 5.8/1.0 7.0/1.0 8.5/1.0 11/1.0 14/1.0 17.5/1.0 20.2/1.0 23.8/1.0 27.5/1.0 33/1.0 34/1.0 38/1.0 43/1.0 47/1.0 50/1.0
0.8/1.3 1.2/1.3 1.7/1.3 2.3/1.3 2.5/1.3 3.7/1.3 25.0/1.3 6.0/1.3 7.5/1.3 9.5/1.3 12/1.3 14/1.3 18/1.3 21/1.3 24/1.3 28/1.3 31/1.25 33/1.3 33/1.3 41.9/1.3 42/1.3
Air supply temperature ≤ambient temperature +8~`15ºC
Motor Power (kw/hp) 7.5/10 11/15 15/20 18.5/25 22/30 30/40 37/50 45/60 55/75 75/100 90/120 110/150 132/175 160/215 185/250 200/270 220/300 250/340 280/380 315/420 355/480
Start method Y-△Starter
Voltage (v/hz)                                              380V 3PH 50HZ     (380V-3PH-60HZ/ 460V- 3PH- 60HZ/ 220V- 3PH-60HZ/ 400V-3PH-50HZ/6000V-3PH-50HZ/other voltagesd can be customized )                                                                               
Drive method V-belt transmission / Coupling transmission
Oil content (PPM)  ≤3
Connector inch 3/4″ 3/4″ 1″ 1″ 1″ 1  1/4″ 1  1/4″ 1 1/2″ 1 1/2″ 2″ 2″ 2  1/4″ 2  1/2″ 2  1/2″ 3″ DN100 DN100 DN100 DN150 DN150 DN150
Noise(Db)±2  56 58 60 60 60 66 66 66 70 71 71 73 75 77 78 80 80 82 84 85 86
Dimension length mm 900 1060 1060 1080 1080 1300 1300 1300 1820 2440 2560 2760 2760 2860 2860 3250 3800 3800 3800 3900 3900
width   mm 700 800 800 880 880 1100 1100 1100 1200 1300 1300 1340 1340 1510 1510 1800 2000 2000 2000 2100 2100
height  mm 1040 1230 1230 1420 1420 1650 1650 1650 1600 1620 1620 1710 1710 1810 1810 2050 2050 2050 2050 2150 2150
Weight (kg) 400 500 550 650 680 1000 1050 1100 1350 1800 2150 2900 3000 3800 4300 5000 5500 6000 6200 6500 6700

III. CE & ISO Certificates:

Package photos:

On-site photos:

IV. Company Introduction

ZheJiang CZPT COMPRESSOR CO., LTD.  is 1 UK wholly-owned compressor company, which was situated in ZheJiang in 2004, based in technical cooperation with European air end manufacturer and British O.S.G. OSG ZheJiang specializes in manufacturing the world-class screw compressors and air purification equipments.
In order to meet customers’ expectations and requirements, OSG ZheJiang integrates the compressing system to embody the merits of reliability, energy saving, silence, convenience.  OSG ZheJiang had obtained the compressor production license (certificate No: XK06-571-0571), quality certificate and general machinery certificate, ISO 9001:2008 certificate and CE certificate.
 OSG has established a nation-wide service system of 40 offices, and provided comprehensive services, such as consulting, training, repairing, spare parts supplying, etc. OSG ZheJiang also do OEM for trading companies and agents, according to their requirements.
 OSG ZheJiang welcome customers and engineers all over the world to study, train and cooperate. Welcome to OSG ZheJiang .
 
 
V. Company Advantages
1.Enormous potentiality, long history
ZheJiang CZPT Compressor Co., Ltd. is 1 British wholly-owned enterprise. Currently in China, OSG has set up 3 major manufacturing bases (ZheJiang CZPT Compressor Co., Ltd, ZHangZhoug Ulite Tools Co.,Ltd., ZheJiang OSG welding), 5 Manufacturers. Meanwhile we cooperate with the European world-advance air end manufacturer. OSG ZheJiang possesses a complete production, sales and after-sales service system. OSG has 40 offices and more than 80 after-sales service centers, and products are sold to more than 20 countries.
 
2. Advanced configuration, world-renowned components, abundant production experience.
    The control system is the most advanced. The controller is designed and manufactured by Schneider, France. It is equipped with the large Chinese-English liquid crystal display screen. It can monitor more than 20 main operating parameters, and has the functions of fault recording, maintenance and alarm shutdown. It can achieve efficient intelligent control, unattended.
Remote control: the computer processor can directly check the user’s real-time operating system. Combine the reliability, energy saving, practicality in one. remote control can start, stop, load, unload the compressor and also other local control can be carried out. The operation, alarm and fault and relative local information can be monitored. (detailed description followed)
Remote control function:
Multiple compressors remote centralized control: reduce system pressure, reduce energy consumption, real-time monitoring.
Dual pressure setting: Two system pressure bands can be set manually or automatically to optimize energy use and reduce operating costs.
Delayed secondary shutdown: This function controls the motor to run only when needed, allowing the motor to run less and minimize the energy consumption.

Choosing the Right Air Compressor For Your Home

You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only 1 motor, they are lightweight, compact, and easy to handle. Using 1 air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.

Positive displacement

A positive displacement compressor applies pressure to a fluid, whereas a centrifugal 1 does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
air-compressor

Oil-free

Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has 1 of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, 4 times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing 1 for your industrial applications.

Single-stage

A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has 1 cylinder and 2 valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery 1 controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, 1 piston, and 1 air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage 1 is suitable for larger-scale arsenals.
air-compressor

CFM

The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting 2 output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.

PSI

The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure 20 to 40 PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least 40 to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as 50 percent on and 20-5 percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by 1 percent.
air-compressor

Power source

The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately 4 amps of power. A one-horsepower compressor would draw about 12 amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with 3 electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.

China 220V, 60Hz Gas Powered Air Compressor for Ice Cream  China 220V, 60Hz Gas Powered Air Compressor for Ice Cream

Gas powered air compressor

As one of the gas powered air compressor manufacturers, suppliers, and exporters of mechanical products, We offer gas powered air compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of gas powered air compressor.

Recent Posts