China 80kw 100kw 120kw 150kw 160kw 180kw 200kw Natural Gas Power Generator

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Click Here

Product Description

80kw 100kw 120kw 150kw 160kw 180kw 200kw Natural Gas Power Generator

ONEW diesel generators are strong-built, ideal for emergency back-up,job sites and industrial appplications.
Powered by reliable air/water cooled diesel generators sets, industrial grade, great fuel efficiency, less maintenance, long operating life.
Low oil shut-down provides added safety against engine damage.
8-10hours long run fuel tanktank with fuel gauge.
stainless steel parts with door lock and hinge fuel tank lock.
Strong frame/capony, durable and strong protection and security on the job.
Hour meter / maintenance resets – easily monitor run time and track maintenance intervals.
Optional ATS sockets for connecting with an external automatic transfer switch.

genset type

rated output

Engine
(Kofo)

Alternator
(Copy stamford)

control

KW/KVA

model

model

Comap

GF2-111

100/125

R6105ZLDS

ON-100KW
(100%COPPER)

Comap
IL3AMF9

Genset SIZE

2700x1050x1470mm(4.42cbm)

Weight

1295kgs

Fuel comsuptions 100%Loading

24L/H

Base Fuel tank

8-10hours fuel tank

Engine Data sheet

Engine model

R6105ZLDS

%
Steady speed adjusting rario at rated condition

≤5

Type

Water cooling,in line,four-stroke,wet liner and direct injection

Mpa
Oil pressure

0.3-0.5

Number of cylinders

6

r/min
Idling speed

≤650

Bore/Stroke mm

105-125

Mpa
Oil pressure at idle speed

≥0.10

Displancement L

6.49

g/kW.h
Oil consumption rate

1.63

Compression ratio

16:1

L
Oil sump capacity

18

Aspiration

turbo & inter cooler

Starting method

Electric motor start

Rated output kW

100

Lubricating method

Pressure lubrication

Rated speed r/min

1500

Crankshaft rotating direction

Counter clockwise(face to output end)

g/kW.h
Fuel consumption rate

≤231

Fring order

1-5-3-6-2-4

r/min
No load Speed

≤1575

Net mass kg

620

Alternator data sheet

Brnad

Copy stamford

Pressure regulating mode

AVR automatic pressure regulation

model

ON-125

bearing

Long life and no need maintencances

Prime power

100kw

Class of insulation

H grade

Exciation mode

Brushless self-excitation

protection

IP23

Power factor

0.8

 

 

ONEW has been focusing solely on diesel products since day one.Products includes AIR/WATER COOLED DIESEL ENGINES, GENERATORS sets and Spare Parts. ONEW Generators to power their homes, factory, contructions,resell, etc.



Warranty

The products will be tested stricly 1 by 1 before delivery with testing video to customer.
Germany production processes and quality standards to guarantee the good quality.
Our warranty is 1 year or 1000 running hours whichever comes first.
But based on some special project,we can extended our warranty period.
Please help us to find out the problem, and we will offer free components for service.
All products will be well packaged and will not be damaged in transit.

FQA

1.How to buy your product?
You can place an order directly through the start order of Made in china
or send email ,add to talk
2.Do buyers need to contact the seller after placing an order?
No, we will contact you as soon as possible by made in china and prepare to ship.
3.How long does it take to receive the product after placing an order?
3-15 days from deposit, after your order, we will contact you and tell you the specific time.
4.how many MOQ?
MOQ is 1
5. Are you a manufacturer or trading company?
We have large factorys, R&D teams and foreign trade teams.
6.How spare parts supply of generator?
We can send u free spare parts during warranty by DHL
7.What kind of diesel use?
#0 diesel
8.How could I trust you?
Diesel Service & Supply stands behind the quality of all the used generators and industrial power equipment we sell. If you are not convinced by the pictures, videos, check-in reports, load tests, customer experiences and sales associates’ knowledge about the generator you are interested in, then we invite you to come visit our expansive yard and shop facility to witness a load test and see the professional operation we have going on here.
ONLINE PAYMENT TRADE ASSURANCE AVAILABLE

If You Are Interesting In ONEW, Pls Contace Us Freely ,Welcome To Visit ONEW!!

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China 80kw 100kw 120kw 150kw 160kw 180kw 200kw Natural Gas Power Generator  China 80kw 100kw 120kw 150kw 160kw 180kw 200kw Natural Gas Power Generator

TAGs:

Gas powered air compressor

As one of the gas powered air compressor manufacturers, suppliers, and exporters of mechanical products, We offer gas powered air compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of gas powered air compressor.

Recent Posts